DriTac 6200 Pressure Sensitive Wood & Resilient Flooring Adhesive, 4 Gal
DriTac 6200 Pressure Sensitive Wood & Resilient Flooring Adhesive, 4 Gal
6200 · 4 GAL
DriTac 6200 is a pressure sensitive flooring adhesive that Sika, which now makes DriTac, describes as having more than 60 years of use, with superior tack and a long open time. It is listed for cork tile and underlayment, luxury vinyl tile and plank, plain-back, foam-backed and acrylic-impregnated parquet, and multi-ply engineered plank. This is the 4-gallon pail.
- Type: Pressure sensitive flooring adhesive
- Floor coverings: Cork tile and underlayment, LVT/LVP, plain-back, foam-backed and acrylic-impregnated parquet, multi-ply engineered plank
- Trowel and coverage: Cork tile up to 1/4": 3/32" V-notch, about 120 sq ft/gal; thicker cork: 1/8" U-notch, about 80 sq ft/gal
- Flash / working time: Tacky in about 30–60 minutes at 70°F and 50% RH; working time of several hours
- Concrete moisture limits: Up to 3 lbs/1,000 sq ft/24 h or 75% RH
- Wood subfloor: Moisture content not over 12%
- Radiant heat: Do not use over radiant-heated subfloors
- VOC: 98 g/L
- Packaging: 4 gal (15.14 L) pail
- Cleanup: Wet adhesive with a damp cloth; dried adhesive with mineral spirits
Specifications from the DriTac 6200 product data sheet.
DriTac 6200 adhesive: common questions
Where can I buy DriTac 6200 adhesive near Atlanta or Nashville?
NDM Floors Distributor carries DriTac 6200 adhesive at our three stores: Stockbridge, GA (south metro Atlanta, 470-507-0711), Marietta, GA (north metro Atlanta, 770-627-4313) and Brentwood, TN (Nashville area, 629-216-1555). Stock varies by store, so call ahead to confirm availability and get a quote.
What trowel do I use with DriTac 6200?
DriTac 6200 goes down with a 3/32" V-notch trowel for cork tile up to 1/4" thick (about 120 sq ft per gallon) and a 1/8" U-notch for thicker cork (about 80 sq ft per gallon). The data sheet lists trowels for other flooring types.
How long does DriTac 6200 need before installing flooring?
DriTac 6200 needs about 30–60 minutes at 70°F and 50% RH to flash to an aggressive tack, then gives several hours of working time.
Can DriTac 6200 be used over radiant heat or damp concrete?
No radiant heat: the DriTac 6200 data sheet says not to use it over radiant-heated subfloors. On concrete it is limited to 3 lbs/1,000 sq ft/24 h or 75% RH, and wood subfloors must be 12% moisture content or less.
See more wood flooring adhesives at NDM Floors Distributor.
