DuraSeal DuraClear Max 2-Component Waterborne Floor Finish, Satin, 1 Gal (809100000)

MAX · SATIN · 1 GAL

DuraSeal DuraClear Max is a clear, non-ambering, two-component water-based finish for commercial and high-traffic residential floors. Mixed with its hardener, it builds a film that DuraSeal positions for scratch, moisture, chemical and slip resistance, and it is designed to go over Quick Coat stain. This is the Satin sheen in the 1-gallon size.

• Type: Two-component water-based finish (urethane/acrylic), non-ambering
• Sheen: Satin (line offered in flat, satin, semi-gloss and gloss)
• Mixing: One 11 oz bottle of hardener per gallon (1 part B to 10.5 parts A); use within 6 hours
• Coverage: About 500 sq ft per gallon
• Recoat: 2–3 hours
• Traffic and cure: Light foot traffic after 24 hours; no rugs, cleaners or heavy traffic for 1 week
• Coats: 2–3; one coat of DuraClear Sealer first on natural floors
• Stain compatibility: DuraSeal Quick Coat or DuraSeal Penetrating Stain
• VOC: 275 g/L max
• Applicator: Synthetic T-bar recommended; brush, lambswool or synthetic pad
• Certification: GREENGUARD Certified
• Cleanup: Warm water

Specifications from the DuraSeal DuraClear Max product page.

DuraSeal DuraClear Max Satin: common questions

Where can I buy DuraSeal DuraClear Max Satin near Atlanta or Nashville?

NDM Floors Distributor carries DuraSeal DuraClear Max Satin at our three stores: Stockbridge, GA (south metro Atlanta, 470-507-0711), Marietta, GA (north metro Atlanta, 770-627-4313) and Brentwood, TN (Nashville area, 629-216-1555). Stock varies by store, so call ahead to confirm availability and get a quote.

Does DuraSeal DuraClear Max need a hardener?

Yes. DuraSeal DuraClear Max is a two-component finish: one 11 oz bottle of hardener activates one gallon, and the mixed finish must be used within 6 hours.

How long does DuraSeal DuraClear Max take to dry?

DuraSeal DuraClear Max can be recoated in 2–3 hours. Allow 24 hours before light foot traffic and one week before rugs, cleaners or heavy traffic.

Does DuraClear Max need a sealer?

DuraSeal calls for one coat of DuraClear Sealer under DuraClear Max on natural (unstained) floors. On stained floors it goes over DuraSeal Quick Coat or Penetrating Stain per label directions.

How much does a gallon of DuraSeal DuraClear Max cover?

DuraSeal DuraClear Max is applied at about 500 sq ft per gallon per coat, with 2–3 coats recommended.

See more water-based floor finishes at NDM Floors Distributor.