Norton Red Heat Sanding Screen, 16", 180 Grit (66261071017)

16" · 180 GRIT

Norton Red Heat screens put 100% ceramic alumina grain on a flexible screen back for 16-inch floor buffers. Norton says they combine the longest life with the most consistent cut and leave a finer scratch than silicon carbide, minimizing swirl marks and the risk of burnishing the wood. 180 grit is a finer screen, used to abrade between coats of finish or to prep an existing finish for a recoat.

• Line: Norton Red Heat screen (Q955)
• Diameter: 16", no center hole
• Grit: P180 (fine)
• Grain: 100% ceramic alumina
• Backing: Screen-Bak, F-weight screen
• Norton pack: 10 screens
• Norton material number: 66261071017

Specifications from the Norton Red Heat screen product page.

Norton Red Heat 16" 180 grit screens: common questions

Where can I buy Norton Red Heat 16" 180 grit screens near Atlanta or Nashville?

NDM Floors Distributor carries Norton Red Heat 16" 180 grit screens at our three stores: Stockbridge, GA (south metro Atlanta, 470-507-0711), Marietta, GA (north metro Atlanta, 770-627-4313) and Brentwood, TN (Nashville area, 629-216-1555). Stock varies by store, so call ahead to confirm availability and get a quote.

What is the difference between Norton Red Heat and Durite sanding screens?

Norton Red Heat screens use ceramic alumina and are Norton’s Best tier; Durite screens use silicon carbide. Norton says Red Heat leaves a finer scratch with fewer swirl marks.

When should I use a 180 grit sanding screen?

On a Norton Red Heat screen, 180 grit is a finer screen, used to abrade between coats of finish or to prep an existing finish for a recoat.

Can you over-screen a hardwood floor?

Yes. Norton warns that over-screening can dish out the soft springwood and close the wood grain, which can keep the finish from bonding properly.

See more sanding screens & buffer pads at NDM Floors Distributor.