Bona Mega ONE Waterborne Floor Finish, Satin, 1 Gal (WT300618001)

SATIN · 1 GAL

Bona Mega ONE is a one-component waterborne finish for heavy-traffic residential rooms such as kitchens and entries, and for light commercial floors. There is no hardener to mix: stir and apply. It dries clear and builds quickly. This is the Satin sheen, a soft, low-luster look.

• Type: One-component waterborne finish
• Sheen: Satin, 20–25 at 60°
• Coverage: 500–600 sq ft per gallon
• Dry time: 2–3 hours between coats
• Cure: 75% at 24 hours, full cure at 5 days
• Coats: Bona sealer or stain plus 2 coats; 3 for heavy traffic
• VOC: 275 g/L
• Application notes: Do not dilute; clean up with water

Specifications from the Bona Mega ONE technical data sheet.

Bona Mega ONE Satin: common questions

Where can I buy Bona Mega ONE Satin near Atlanta or Nashville?

NDM Floors Distributor carries Bona Mega ONE Satin at our three stores: Stockbridge, GA (south metro Atlanta, 470-507-0711), Marietta, GA (north metro Atlanta, 770-627-4313) and Brentwood, TN (Nashville area, 629-216-1555). Stock varies by store, so call ahead to confirm availability and get a quote.

Does Bona Mega ONE need a hardener?

No. Bona Mega ONE is a one-component waterborne finish, so there is nothing to mix: stir it and apply. Do not dilute it.

What is the sheen level of Bona Mega ONE Satin?

Bona Mega ONE Satin measures 20–25 at 60°, according to Bona. Mega ONE comes in Extra Matte (7–9), Satin (20–25) and Semi-Gloss (40–45).

How much does 1 gallon of Bona Mega ONE cover?

One gallon of Bona Mega ONE covers about 500–600 sq ft per coat. Bona recommends a Bona sealer or stain plus 2 coats, and a third coat in heavy-traffic areas.

How long does Bona Mega ONE take to dry and cure?

Bona Mega ONE needs 2–3 hours between coats. Bona lists it as 75% cured after 24 hours and fully cured after 5 days.

See more water-based floor finishes at NDM Floors Distributor.