Bona Mega Waterborne Floor Finish, Satin, 1 Gal (WT130618001)

SATIN · 1 GAL

Bona Mega is a one-component waterborne finish for heavy-traffic residential rooms such as kitchens, entryways and family rooms, and for commercial floors in restaurants, offices, retail stores and schools. With no hardener, there is no limited pot life and no wasted finish. This is the Satin sheen, a soft, low-luster look.

• Type: One-component waterborne finish
• Sheen: Satin, 25–30 at 60°
• Coverage: 500–600 sq ft per gallon
• Dry time: 2–3 hours between coats
• Cure: 70% at 24 hours, full cure at 7 days
• Coats: Minimum 2; a third coat for heavy traffic
• VOC: 200 g/L
• Application notes: Do not dilute; clean up with water

Specifications from the Bona Mega technical data sheet.

Bona Mega Satin: common questions

Where can I buy Bona Mega Satin near Atlanta or Nashville?

NDM Floors Distributor carries Bona Mega Satin at our three stores: Stockbridge, GA (south metro Atlanta, 470-507-0711), Marietta, GA (north metro Atlanta, 770-627-4313) and Brentwood, TN (Nashville area, 629-216-1555). Stock varies by store, so call ahead to confirm availability and get a quote.

What is the difference between Bona Mega and Bona Mega ONE?

Bona Mega and Bona Mega ONE are both one-component waterborne finishes covering 500–600 sq ft per gallon. Per Bona, Mega is 200 g/L VOC and fully cures in 7 days; Mega ONE is 275 g/L and cures in 5 days. Of the two, only Mega comes in Gloss.

What is the sheen level of Bona Mega Satin?

Bona Mega Satin measures 25–30 at 60°. The line runs from Extra Matte (8–10) through Satin (25–30) and Semi-Gloss (45–50) to Gloss (over 90).

How long does Bona Mega take to dry and cure?

Bona Mega needs 2–3 hours between coats. Bona lists it as 70% cured after 24 hours and fully cured after 7 days.

How many coats of Bona Mega do I need?

Bona recommends a minimum of 2 coats of Bona Mega, with a third coat in heavy-traffic areas.

See more water-based floor finishes at NDM Floors Distributor.