Rubio Monocoat Oil Plus 2C Part A, Cortado, 20 ml Sample

CORTADO · PART A · 20 ML

A 20 ml sample of Rubio Monocoat Oil Plus 2C Part A in Cortado, for testing the color on your actual wood before ordering full sizes. Oil Plus 2C is a two-component hardwax oil that colors and protects in a single coat with 0% VOC. Part A is mixed with Part B accelerator, sold separately.

• Product: Rubio Monocoat Oil Plus 2C, two-component hardwax oil that colors and protects in one coat
• Color: Cortado (one of 40 standard, intermixable Oil Plus 2C colors)
• Size: 20 ml Part A only; Part B accelerator sold separately
• Mixing: About 3 parts A to 1 part B accelerator; pot life 4–6 hours
• Spread rate: 300–500 sq ft per liter, depending on species and sanding
• Application: One coat; let it penetrate about 5 minutes, then remove all excess within 30 minutes with a white pad or terry cloth
• Dry / cure: Dry in 24 hours, 80% cured in 48 hours, fully cured in 5 days
• VOC: 0 g/L

Specifications from the Rubio Monocoat Oil Plus 2C technical data sheet.

Rubio Monocoat Oil Plus 2C Cortado: common questions

Where can I buy Rubio Monocoat Oil Plus 2C Cortado near Atlanta or Nashville?

NDM Floors Distributor carries Rubio Monocoat Oil Plus 2C Cortado at our three stores: Stockbridge, GA (south metro Atlanta, 470-507-0711), Marietta, GA (north metro Atlanta, 770-627-4313) and Brentwood, TN (Nashville area, 629-216-1555). Stock varies by store, so call ahead to confirm availability and get a quote.

Is Part B included with Rubio Monocoat Oil Plus 2C Part A?

No. Rubio Monocoat Oil Plus 2C Part B accelerator is sold separately. Mix about 3 parts A to 1 part B; the mix stays usable for 4–6 hours.

How should I test Rubio Monocoat Oil Plus 2C Cortado?

Rubio Monocoat recommends making a sample with a Part A sample size on your own project wood, sanded and prepared the same way as the job, because the same Oil Plus 2C color can look different on each species.

How many coats of Rubio Monocoat Oil Plus 2C do I need?

Rubio Monocoat Oil Plus 2C is a one-coat finish. Apply it, let it penetrate for about 5 minutes, then remove all excess within 30 minutes with a white pad or terry cloth.

See more Rubio Monocoat at NDM Floors Distributor.