Oakcrest Unfinished Solid Red Oak Flooring, Select, 1-1/2" x 3/4"
RED OAK · SELECT · 1-1/2"
Unfinished solid red oak flooring in Select grade, 3/4" thick by 1-1/2" wide, from Oakcrest Lumber, a family-owned mill whose solid flooring is made in Buena Vista, Georgia. Select grade shows the natural color range of heartwood and sapwood with only limited small knots and marks, for a clean, fairly uniform floor. Red oak brings warm, pinkish-red undertones and a bold, open grain. It is sold unfinished, to be sanded, stained if desired and finished after installation.
- Species: Red oak
- Grade: Select (NWFA: natural heartwood and sapwood color variation; limited character such as one small tight knot per 3 ft and pin worm holes; average board length at least 32")
- Dimensions: 3/4" x 1-1/2"
- Board type: Strip flooring (NWFA: under 3" wide)
- Finish: Unfinished — sand and finish after installation
- Mill: Oakcrest Lumber, Buena Vista, GA
- Janka hardness (Oakcrest): 1290
Specifications from the NWFA unfinished flooring grading standard.
Oakcrest 1-1/2" Select red oak flooring: common questions
Where can I buy Oakcrest 1-1/2" Select red oak flooring near Atlanta or Nashville?
NDM Floors Distributor carries Oakcrest 1-1/2" Select red oak flooring at our three stores: Stockbridge, GA (south metro Atlanta, 470-507-0711), Marietta, GA (north metro Atlanta, 770-627-4313) and Brentwood, TN (Nashville area, 629-216-1555). Stock varies by store, so call ahead to confirm availability and get a quote.
What does Select grade mean for red oak flooring?
Under the NWFA grading standard, Select oak flooring shows the natural color variation of heartwood and sapwood with limited character: about one small tight knot every 3 feet, pin worm holes and slightly open checks. The average board length is at least 32 inches.
Is Oakcrest red oak flooring prefinished?
No. Oakcrest Select red oak flooring is unfinished: install it first, then sand, stain if desired and finish it on site. Call your NDM store for bundle and pallet quantities on the 1-1/2" width.
Where is Oakcrest flooring made?
Oakcrest Lumber, a family-owned company, mills its solid hardwood flooring in Buena Vista, Georgia, where it also runs a hardwood sawmill.
Is 1-1/2" red oak flooring strip or plank?
Oakcrest 1-1/2-inch red oak is strip flooring. The NWFA grading standard classes boards under 3 inches wide as strip flooring and boards 3 inches and wider as plank.
See more unfinished hardwood flooring at NDM Floors Distributor.