Masterline Waterbased Semi-Gloss 1 gal

Masterline Water-Based Polyurethane Floor Finish, Semi-Gloss, 1 Gal

$42.99
Skip to product information
Masterline Waterbased Semi-Gloss 1 gal

Masterline Water-Based Polyurethane Floor Finish, Semi-Gloss, 1 Gal

$42.99

WATERBASE · SEMI-GLOSS · 1 GAL

Masterline Water-Based Polyurethane is a single-component, water-based wood floor finish from the makers of DuraSeal, suited to residential and commercial floors. It recoats in 2–3 hours and cleans up with water. This is the Semi-Gloss sheen in the 1-gallon can.

  • Type: Single-component water-based polyurethane
  • Sheen: Semi-Gloss (line offered in gloss, semi-gloss and satin)
  • Size: 1 Gal
  • Coverage: 500–600 sq ft per gallon
  • Recoat: 2–3 hours; no abrading needed if the next coat goes on within 8 hours
  • Traffic: Light use 24 hours after the final coat
  • Coats: 2–3
  • Applicators: Synthetic bar applicator recommended; roller, T-bar, pad or brush
  • Cleanup: Warm water

Specifications from the Masterline Water-Based Polyurethane product page.

Masterline water-based polyurethane Semi-Gloss: common questions

Where can I buy Masterline water-based polyurethane Semi-Gloss near Atlanta or Nashville?

NDM Floors Distributor carries Masterline water-based polyurethane Semi-Gloss at our three stores: Stockbridge, GA (south metro Atlanta, 470-507-0711), Marietta, GA (north metro Atlanta, 770-627-4313) and Brentwood, TN (Nashville area, 629-216-1555). Stock varies by store, so call ahead to confirm availability and get a quote.

How long between coats of Masterline Water-Based Polyurethane?

Masterline Water-Based Polyurethane can be recoated after 2–3 hours. If the next coat goes on within 8 hours, no abrading is needed; after that, abrade lightly with a used DuraSeal Pre-Treat pad first.

How much does a gallon of Masterline Water-Based Polyurethane cover?

Masterline Water-Based Polyurethane covers 500–600 sq ft per gallon, so a gallon covers roughly 500–600 sq ft per coat. Plan on 2–3 coats.

Does Masterline Water-Based Polyurethane need a hardener?

No. Masterline Water-Based Polyurethane is a single-component finish: there is no hardener to mix, and tools clean up with warm water.

See more water-based floor finishes at NDM Floors Distributor.