Masterline Waterbase Satin 5Gal

Masterline Water-Based Polyurethane Floor Finish, Satin, 5 Gal

$179.99
Skip to product information
Masterline Waterbase Satin 5Gal

Masterline Water-Based Polyurethane Floor Finish, Satin, 5 Gal

$179.99

WATERBASE · SATIN · 5 GAL

Masterline Water-Based Polyurethane is a single-component, water-based wood floor finish from the makers of DuraSeal, suited to residential and commercial floors. It recoats in 2–3 hours and cleans up with water. This is the Satin sheen in the 5-gallon pail.

  • Type: Single-component water-based polyurethane
  • Sheen: Satin (line offered in gloss, semi-gloss and satin)
  • Size: 5 Gal
  • Coverage: 500–600 sq ft per gallon
  • Recoat: 2–3 hours; no abrading needed if the next coat goes on within 8 hours
  • Traffic: Light use 24 hours after the final coat
  • Coats: 2–3
  • Applicators: Synthetic bar applicator recommended; roller, T-bar, pad or brush
  • Cleanup: Warm water

Specifications from the Masterline Water-Based Polyurethane product page.

Masterline water-based polyurethane Satin: common questions

Where can I buy Masterline water-based polyurethane Satin near Atlanta or Nashville?

NDM Floors Distributor carries Masterline water-based polyurethane Satin at our three stores: Stockbridge, GA (south metro Atlanta, 470-507-0711), Marietta, GA (north metro Atlanta, 770-627-4313) and Brentwood, TN (Nashville area, 629-216-1555). Stock varies by store, so call ahead to confirm availability and get a quote.

How long between coats of Masterline Water-Based Polyurethane?

Masterline Water-Based Polyurethane can be recoated after 2–3 hours. If the next coat goes on within 8 hours, no abrading is needed; after that, abrade lightly with a used DuraSeal Pre-Treat pad first.

How much does a 5-gallon pail of Masterline Water-Based Polyurethane cover?

Masterline Water-Based Polyurethane covers 500–600 sq ft per gallon, so a 5-gallon pail covers roughly 2,500–3,000 sq ft per coat. Plan on 2–3 coats.

Does Masterline Water-Based Polyurethane need a hardener?

No. Masterline Water-Based Polyurethane is a single-component finish: there is no hardener to mix, and tools clean up with warm water.

See more water-based floor finishes at NDM Floors Distributor.