LOBA EasyFinish Waterborne Floor Finish, Semi-Gloss, 1 Gal (LO-FI-014)

SEMI-GLOSS · EASY FINISH · 1 GAL

LOBA EasyFinish is a one-component polyurethane-acrylate water-based finish for wood and cork floors in light commercial and high-traffic residential areas. There is no hardener to mix, no pot life and no waste, and LOBA lists it as 90% cured after 24 hours. This is the Semi-Gloss sheen.

• Type: One-component polyurethane-acrylate water-based finish
• Sheen: Semi-Gloss (line: Gloss, Semi-Gloss, Satin)
• Coverage: 500–600 sq ft per gallon per coat
• Recoat: 2–3 hours minimum
• Cure: 90% at 24 hours; full cure after 5 days
• Coats: Minimum 2 coats on wood floors
• Sealer: LOBA EasyPrime or LOBA 2K Intensive
• Application: LOBA Micro 120 roller or T-bar

Specifications from the LOBA EasyFinish product page.

LOBA EasyFinish Semi-Gloss: common questions

Where can I buy LOBA EasyFinish Semi-Gloss near Atlanta or Nashville?

NDM Floors Distributor carries LOBA EasyFinish Semi-Gloss at our three stores: Stockbridge, GA (south metro Atlanta, 470-507-0711), Marietta, GA (north metro Atlanta, 770-627-4313) and Brentwood, TN (Nashville area, 629-216-1555). Stock varies by store, so call ahead to confirm availability and get a quote.

Does LOBA EasyFinish need a hardener?

No. LOBA EasyFinish is a one-component finish, so there is no hardener to mix and no pot life. LOBA lists it as 90% cured after 24 hours.

How long does LOBA EasyFinish take to dry?

LOBA EasyFinish can be recoated after 2–3 hours and reaches full cure after 5 days.

How many coats of LOBA EasyFinish do I need?

LOBA calls for at least 2 coats of EasyFinish on wood floors, over a coat of LOBA EasyPrime or 2K Intensive sealer.

How much does a gallon of LOBA EasyFinish cover?

One gallon of LOBA EasyFinish covers about 500–600 sq ft per coat, applied with a LOBA Micro 120 roller or a T-bar.

See more water-based floor finishes at NDM Floors Distributor.