DuraSeal Water-Based Polyurethane Floor Finish, Satin, 5 Gal
DuraSeal Water-Based Polyurethane Floor Finish, Satin, 5 Gal
WATERBASE · SATIN · 5 GAL
DuraSeal Water-Based Polyurethane is a single-component floor finish with a warm, amber tone, for the look of an oil-based finish with soap-and-water cleanup. DuraSeal formulates it to work with Quick Coat stain as a complete system. This is the Satin sheen in the 5-gallon pail.
- Type: Single-component water-based polyurethane, ambering
- Sheen: Satin (25 ±5 gloss)
- Size: 5 Gal
- Coverage: About 500 sq ft per gallon
- Recoat: 2–3 hours (77°F, 50% RH)
- Traffic and cure: Foot traffic 24 hours; return to service 72 hours; full cure 1 week
- Coats: 2–3
- Stain: Formulated as a system with DuraSeal Quick Coat
- VOC: 275 g/L max
- Applicator: Synthetic T-bar, roller or pad
- Certification: GREENGUARD Certified
- Cleanup: Warm water
Specifications from the DuraSeal Water-Based Polyurethane product page.
DuraSeal water-based polyurethane Satin: common questions
Where can I buy DuraSeal water-based polyurethane Satin near Atlanta or Nashville?
NDM Floors Distributor carries DuraSeal water-based polyurethane Satin at our three stores: Stockbridge, GA (south metro Atlanta, 470-507-0711), Marietta, GA (north metro Atlanta, 770-627-4313) and Brentwood, TN (Nashville area, 629-216-1555). Stock varies by store, so call ahead to confirm availability and get a quote.
Does DuraSeal Water-Based Polyurethane amber?
Yes. DuraSeal Water-Based Polyurethane is an ambering finish with a warm, amber appearance, so it gives the look of an oil-based finish. For a clear, non-ambering look, DuraSeal makes DuraClear.
How long does DuraSeal Water-Based Polyurethane take to dry?
DuraSeal Water-Based Polyurethane can be recoated in 2–3 hours. Allow 24 hours for foot traffic, 72 hours for return to service and one week for full cure.
How much does a 5-gallon pail of DuraSeal Water-Based Polyurethane cover?
DuraSeal Water-Based Polyurethane covers about 500 sq ft per gallon, so a 5-gallon pail covers about 2,500 sq ft per coat. DuraSeal recommends 2–3 coats.
See more water-based floor finishes at NDM Floors Distributor.
