DuraSeal Quick Coat Penetrating Finish Stain, Special Walnut #124, 1 Gal

SPECIAL WALNUT · 1 GAL

DuraSeal Quick Coat 2-Hour Penetrating Finish is an oil-based, semi-transparent stain that colors and seals raw wood floors, ready for topcoat in about two hours. Special Walnut (#124) is one of 36 packaged Quick Coat colors, with more than 65 intermix options for custom shades. This is the 1-gallon can. A gallon covers about 500 sq ft on the first coat.

• Type: Oil-based penetrating finish (semi-transparent stain)
• Color: Special Walnut #124 (one of 36 packaged colors; 65+ intermix options)
• Size: 1 gallon (Quick Coat comes in quarts and gallons)
• Coverage: About 500 sq ft per gallon first coat; about 800 sq ft per gallon optional second coat
• Topcoat: After 2 hours minimum (77°F, 50% RH)
• Coats: 1 to 2
• Application: Rag, brush, pad or buffer; wipe off or buff off the excess
• Working conditions: 50–90°F, humidity below 80%
• Compatibility: DuraSeal and Masterline water-based and oil-based finishes
• VOC: 550 g/L max
• Certification: GREENGUARD Certified
• Cleanup: Mineral spirits or paint thinner

Specifications from the DuraSeal Quick Coat product page.

DuraSeal Quick Coat Special Walnut: common questions

Where can I buy DuraSeal Quick Coat Special Walnut near Atlanta or Nashville?

NDM Floors Distributor carries DuraSeal Quick Coat Special Walnut at our three stores: Stockbridge, GA (south metro Atlanta, 470-507-0711), Marietta, GA (north metro Atlanta, 770-627-4313) and Brentwood, TN (Nashville area, 629-216-1555). Stock varies by store, so call ahead to confirm availability and get a quote.

How long before I can put finish over DuraSeal Quick Coat stain?

DuraSeal Quick Coat can be topcoated after a minimum of 2 hours at 77°F and 50% relative humidity. Cooler or more humid rooms need more time.

How much does a gallon of DuraSeal Quick Coat Special Walnut cover?

One gallon of DuraSeal Quick Coat covers about 500 sq ft on the first coat and about 800 sq ft on an optional second coat, according to DuraSeal.

How do you apply DuraSeal Quick Coat stain?

DuraSeal Quick Coat goes on by rag, brush, pad or buffing machine, and the excess is removed by wiping with rags or buffing. DuraSeal recommends working between 50 and 90°F with humidity below 80%.

What is the color number for DuraSeal Quick Coat Special Walnut?

DuraSeal lists Special Walnut as color #124 in the Quick Coat 2-Hour Penetrating Finish line, which has 36 packaged colors.

See more hardwood floor stains at NDM Floors Distributor.