DuraSeal DuraClear Waterborne Floor Sealer, 1 Gal (800110000)

SEALER · 1 GAL

DuraSeal DuraClear Sealer is a water-based urethane sealer for bare wood floors. Its tannin-blocking formula is made to stop soluble stains and tannins from migrating into the finish, which matters on oak. Use it under DuraClear, DuraClear Max and other DuraSeal water-based finishes.

• Type: Water-based urethane sealer, tannin-blocking
• Coverage: About 500–600 sq ft per gallon
• Dry time: 1–2 hours, then apply finish within 24 hours (77°F, 50% RH)
• Coats: 1–2; two coats on natural white oak
• Topcoat: DuraSeal water-based finishes
• Applicator: Natural bristle or foam brush, lambswool or synthetic pad
• Size: 1 gallon
• Cleanup: Warm water

Specifications from the DuraSeal DuraClear Sealer product page.

DuraSeal DuraClear Sealer: common questions

Where can I buy DuraSeal DuraClear Sealer near Atlanta or Nashville?

NDM Floors Distributor carries DuraSeal DuraClear Sealer at our three stores: Stockbridge, GA (south metro Atlanta, 470-507-0711), Marietta, GA (north metro Atlanta, 770-627-4313) and Brentwood, TN (Nashville area, 629-216-1555). Stock varies by store, so call ahead to confirm availability and get a quote.

How long does DuraSeal DuraClear Sealer take to dry?

DuraSeal DuraClear Sealer dries in 1–2 hours at 77°F and 50% humidity. Apply the finish coat within 24 hours.

How many coats of DuraClear Sealer go on white oak?

DuraSeal calls for two coats of DuraClear Sealer on natural white oak floors, to help block tannins. One to two coats are typical on other floors.

How much does a gallon of DuraSeal DuraClear Sealer cover?

One gallon of DuraSeal DuraClear Sealer covers about 500–600 sq ft per coat.

See more water-based floor finishes at NDM Floors Distributor.