Norton Red Heat Floor Sanding Belt, 7-7/8" x 29-1/2", 24 Grit (69957345034)

24 GRIT

Norton Red Heat R955P is a cloth floor sanding belt made with 100% SG seeded-gel ceramic alumina grain for drum-style belt floor sanders. Norton lists this material number as a 7-7/8" x 29-1/2" belt. 24 grit is a very coarse grit for the heaviest removal: thick or gummy old finishes, paint, and badly cupped or uneven floors.

• Line: Norton Red Heat R955P
• Grain: 100% SG (seeded gel) ceramic alumina
• Backing: Cloth
• Grit: 24 (coarse)
• Size: 7-7/8" x 29-1/2"
• Norton pack: 5 belts per box (ask your store about single belts)
• Norton material number: 69957345034
• Fit: Same size as the 200 x 750 mm (about 7.9" x 29.5") belt Lägler lists for the HUMMEL; confirm the belt size for your sander

Specifications from the Norton Red Heat R955P coarse grit belt page.

Norton Red Heat 24 grit belts: common questions

Where can I buy Norton Red Heat 24 grit belts near Atlanta or Nashville?

NDM Floors Distributor carries Norton Red Heat 24 grit belts at our three stores: Stockbridge, GA (south metro Atlanta, 470-507-0711), Marietta, GA (north metro Atlanta, 770-627-4313) and Brentwood, TN (Nashville area, 629-216-1555). Stock varies by store, so call ahead to confirm availability and get a quote.

When should I use a 24 grit floor sanding belt?

On a Norton Red Heat belt, 24 grit is a very coarse grit for the heaviest removal: thick or gummy old finishes, paint, and badly cupped or uneven floors. Refinishers step up through the grits so each pass removes the scratches from the last.

What are Norton Red Heat sanding belts made of?

Norton Red Heat R955P belts use 100% SG (seeded gel) ceramic alumina grain on a flexible, shock-absorbent cloth backing.

Will this Norton Red Heat belt fit my Lägler HUMMEL?

Norton lists this Red Heat belt as 7-7/8" x 29-1/2", the same size as the 200 x 750 mm belt Lägler specifies for the HUMMEL. For any other sander, check its belt size or call your NDM store with the model.

Are Norton Red Heat belts good for removing old finish?

Norton says the Red Heat ceramic grain is very sharp and cuts cooler, so the old coating heats up less and gums up the belt less while it is being removed.

See more floor sanding belts at NDM Floors Distributor.