Norton Durite Screen-Bak Sanding Screen, 16", 180 Grit, Black (66261120514)

16" · 180 GRIT · BLACK

Norton Durite Screen-Bak screens are the black silicon carbide sanding screens that run on a 16-inch floor buffer. The open-weave polyester mesh resists clogging, the full-resin bond holds the grain, and Norton says the screens are waterproof, so they can be rinsed and reused. 180 grit is a finer screen, used to abrade between coats of finish or to prep an existing finish for a recoat.

• Line: Norton Screen-Bak Durite (Q421)
• Diameter: 16", no center hole
• Grit: P180 (fine)
• Grain: P-graded silicon carbide
• Backing: Open-weave polyester screen, full-resin bond
• Norton pack: 10 screens
• Norton material number: 66261120514

Specifications from the Norton Screen-Bak Durite screen product page.

Norton Durite 16" 180 grit screens: common questions

Where can I buy Norton Durite 16" 180 grit screens near Atlanta or Nashville?

NDM Floors Distributor carries Norton Durite 16" 180 grit screens at our three stores: Stockbridge, GA (south metro Atlanta, 470-507-0711), Marietta, GA (north metro Atlanta, 770-627-4313) and Brentwood, TN (Nashville area, 629-216-1555). Stock varies by store, so call ahead to confirm availability and get a quote.

What is a floor sanding screen used for?

A floor sanding screen, like this Norton Durite 16-inch screen, runs on a floor buffer to smooth the floor after sanding and to abrade the finish between coats in screen-and-recoat work.

When should I use a 180 grit sanding screen?

On a Norton Durite screen, 180 grit is a finer screen, used to abrade between coats of finish or to prep an existing finish for a recoat.

Can Norton Durite screens be reused?

Yes. Norton says its Screen-Bak Durite screens are waterproof and can be rinsed and reused, and the open mesh resists clogging with dust.

Is Norton Red Heat or Durite better for screening?

Norton rates Durite silicon carbide screens as its Good tier and Red Heat ceramic screens as Best: Norton says Red Heat leaves a finer scratch than silicon carbide, with fewer swirl marks.

See more sanding screens & buffer pads at NDM Floors Distributor.